Experts in Automotive Workwear & PPE Solutions

Book a Consultation with the Uniform Experts

Call us today on 01282 505043 or email sales@jaybeesupplies.co.uk to arrange your free, no-obligation consultation.

Advantage PPE and Workwear — helping automotive professionals equip their teams with practical workwear and PPE for workshops, garages, bodyshops and vehicle repair environments.

⚠️General guidance only: the PPE listed on this page is a general guide for this sector. Actual requirements depend on the specific role, task and site conditions, and must be confirmed against a proper risk assessment for each role. For the full legal requirements, see the HSE PPE Regulations 2022.

PPE is the last line of defence to an identified risk.
It’s the employer’s responsibility to provide PPE in line with Role Risk Assessments.

Industry Guide 06

Automotive & Vehicle Repair PPE

From MOT bays and tyre fitting to bodyshop welding and spray painting, automotive and vehicle repair work brings together sharp tools, hot surfaces, chemical exposure, paint fumes and heavy component handling. Below is a practical, head-to-toe guide to the PPE typically required in these workshops.

Need a hand? If you’d like a tailored PPE list for your specific workshop, bodyshop or bay, just give us a call.

Call 01282 505043

Requirements vary by role and site — always confirm against your own risk assessment. As a general guide:



Required on most sites



Situational / task-specific



Recommended good practice

Automotive head protection PPE

Head Protection

  • Bump caps for under-vehicle and low-clearance work — Situational
  • Welding helmets for bodyshop/chassis repair — Situational

Automotive eye and face protection PPE

Eye & Face Protection

  • Safety glasses (EN 166) — Required
  • Goggles for brake dust/grinding tasks — Situational
  • Welding visors for bodyshop repair — Situational
  • Face shields for panel cutting/grinding — Situational

Automotive hearing protection PPE

Hearing Protection

  • Ear plugs/defenders for pneumatic tool use — Required
  • Ear defenders for engine testing bays — Situational

Automotive respiratory protection PPE

Respiratory Protection

  • Paint spray respirators (spray booth work) — Required
  • Dust masks for brake/clutch work — Required
  • Welding fume extraction masks — Situational
  • RPE face-fit testing kits — Recommended

Automotive hand protection PPE

Hand Protection

  • Cut-resistant gloves for panel/sheet metal work (EN 388) — Required
  • Chemical-resistant gloves for oils, brake fluid, solvents — Required
  • Heat-resistant gloves for welding/exhaust work — Situational
  • Anti-vibration gloves for impact wrenches — Recommended

Automotive foot protection PPE

Foot Protection

  • Safety boots/shoes, steel/composite toe (EN ISO 20345) — Required
  • Slip-resistant soles for oily workshop floors — Required
  • Metatarsal guards for tyre fitting/wheel handling — Situational

Automotive body protection PPE

Body Protection

  • Coveralls/boiler suits — Required
  • Flame-retardant clothing for welding/hot works — Situational
  • Chemical-resistant aprons for degreasing/fluid work — Situational
  • Spray suits for paint booth work — Required

Specialist automotive PPE

Specialist Protection

  • Barrier creams for repeated oil/solvent contact — Recommended
  • Axle stand/lift safety checks (task equipment, not PPE) — Recommended
  • EV/hybrid insulated gloves for high-voltage vehicle work — Situational
  • Arc-rated clothing for EV battery work — Situational

A note on fit: a technician fitting tyres has very different PPE needs to a bodyshop sprayer or someone working on an EV’s high-voltage battery pack, even within the same garage — PPE choice should always follow the task and the vehicle system involved, not just the industry label. This is exactly why a role-specific risk assessment matters more than a generic list.

Looking for another sector? More industry guides are being added regularly. In the meantime, talk to us and we’ll build a role-based PPE list for your specific site.

PPE is the last line of defence to an identified risk.
It’s the employer’s responsibility to provide PPE in line with Role Risk Assessments.

Book a Consultation with the Uniform Experts

If you’re looking to upgrade your automotive workwear or PPE, we’d love to help. Our experts will listen to the requirements of your garage, workshop, bodyshop or repair facility and create a tailored solution that helps keep your team protected, comfortable and professional.

Talk to Our Team

Call us today on 01282 505043 or email sales@jaybeesupplies.co.uk to arrange your free, no-obligation consultation.

Advantage PPE and Workwear — helping automotive professionals equip their teams with practical workwear and PPE for workshops, garages, bodyshops and vehicle repair environments.