PPE Knowledge Centre
Eye & Face Protection
A practical Jaybee Supplies guide to safety spectacles, goggles, face shields, welding helmets, laser eyewear, standards, shade numbers, fit, inspection and correct workplace use.
PPE Knowledge Centre
A practical Jaybee Supplies guide to safety spectacles, goggles, face shields, welding helmets, laser eyewear, standards, shade numbers, fit, inspection and correct workplace use.
Guide Type
Knowledge Centre
Topic
Eye & Face Protection
Audience
Workers & Buyers
Focus
Standards, Fit & Hazards
1. Eye & Face Risk
Eye and face protection shields the eyes, face and sometimes the neck from workplace hazards. Eyesight is irreplaceable, and even a minor eye injury can cause lasting vision damage.
The correct product depends on the task. Safety spectacles, sealed goggles, face shields, welding helmets, laser eyewear and UV or IR filters all protect against different hazards. No single product protects against everything.
Key point: a face shield is not a standalone eye protector. Where there is splash, dust or particle risk, suitable safety goggles or spectacles must normally be worn underneath.
2. Legal Requirements
Eye and face PPE must be selected through risk assessment and supplied where hazards cannot be adequately controlled by other means. Employers should also ensure the product is suitable, compatible with other PPE, maintained, stored correctly and used properly.
| Standard | What It Covers | Application |
|---|---|---|
| EN 166 | The main framework standard for eye protection. | All eye and face protection. |
| EN 169 | Welding filters and shade numbers. | Gas welding, brazing and cutting. |
| EN 170 | UV filters and ultraviolet protection. | UV lamps, germicidal work and outdoor UV exposure. |
| EN 171 | Infrared filters. | Foundry, glasswork and furnace work. |
| EN 175 | Welding helmets and hand shields. | MIG, TIG and MMA arc welding. |
| EN 207 | Laser protection eyewear. | Laser cutting, engraving and medical laser work. |
| EN 379 | Auto-darkening welding filters. | Auto-darkening welding helmets. |
Lens and frame markings show the protection level. Codes can include optical class, filter type, mechanical strength, frame seal code and conformity marking. For example, Class 1 lenses are best for all-day wear, while frame codes may show protection against liquid droplets, dust, gas, fine dust or arc flash.
3. Product Types
Eye and face protection ranges from lightweight safety spectacles to specialist laser eyewear and auto-darkening welding helmets. Product choice must match the hazard, not just the job title.
| Product Type | Typical Standard | Primary Use |
|---|---|---|
| Safety Spectacles | EN 166 | Light particle hazards, basic impact risk and outdoor UV-rated use. |
| Indirect-Vent Safety Goggles | EN 166 code 3/4 | Chemical splash, grinding dust and fine particles. |
| Direct-Vent Safety Goggles | EN 166 | Dust and chipping only. Not suitable for liquids. |
| Clear Face Shields | EN 166 | Full-face coverage over spectacles or goggles. |
| Welding Helmets | EN 175 / EN 169 / EN 379 | MIG, TIG, MMA and other welding processes. |
| Gas Welding Goggles | EN 175 / EN 169 | Gas welding, brazing and torch cutting. |
| Laser Safety Eyewear | EN 207 | Laser work matched to wavelength and optical density. |
| Over-Specs | EN 166 | Prescription glasses wearers in hazardous areas. |
A face shield alone does not seal the eyes against fine dust, vapour or splash entering from below or the sides. Use suitable goggles or spectacles underneath.
4. Applications
Many tasks involve more than one hazard at once. Grinding may involve impact, sparks and fine particles. Chemical work may involve splash and vapour. Welding may involve optical radiation, spatter and heat.
| Industry / Task | Specific Hazard | Recommended Protection |
|---|---|---|
| Construction cutting and drilling | Flying debris and dust | EN 166 safety spectacles minimum; goggles for heavy dust. |
| Concrete or silica cutting | Silica dust and flying fragments | Indirect-vent goggles. |
| MIG / MMA welding | Arc flash, UV, IR and spatter | EN 175 welding helmet with suitable shade. |
| Grinding | Flying swarf, sparks and fine particles | Goggles plus face shield over the top. |
| Chemical handling | Splash, mist, spray or vapour | Indirect-vent or sealed chemical goggles depending on risk. |
| Healthcare and laboratories | Chemical, biological and splash risk | Goggles or face shield depending on the procedure. |
| Foundry and casting | Molten metal, radiant heat and IR | IR goggles with face shield over where required. |
| Laser cutting or engraving | Laser radiation | EN 207 laser eyewear matched to wavelength and OD. |
From safety spectacles and sealed goggles to face shields, welding helmets, over-specs and specialist protection, we can help you choose products that match the hazard rather than guessing from a generic product list.
5. Selection
The first step is to identify the hazard. Is the risk mechanical, chemical, optical, biological, heat-related or a combination? Once the hazard is clear, the protection level can be matched properly.
Remember: never downgrade eye protection because it is uncomfortable. If comfort is the problem, choose a better-fitting product.
| Welding Process | Current / Tip Size | Recommended Shade |
|---|---|---|
| MMA welding | Up to 100A | Shade 10 |
| MMA welding | 100–200A | Shade 11 |
| MIG / MAG welding | Up to 250A | Shade 11 |
| MIG / MAG welding | 250A+ | Shade 12–13 |
| TIG welding | Up to 100A | Shade 9–10 |
| Plasma cutting | 80–200A | Shade 10–11 |
| Gas welding | Light to heavy tip | Shade 4–7 |
| Torch brazing | Light to medium | Shade 3–4 |
6. Fit & Use
Even high-quality eye protection can fail if it does not fit correctly, is removed during the task, is incompatible with other PPE or is damaged through poor storage and cleaning.
7. Inspection
Scratched, fogged or damaged lenses significantly reduce both optical quality and protection. There is no fixed service life for all eye protection, so replacement should be based on condition and manufacturer guidance.
| Inspection Point | What to Check | Action |
|---|---|---|
| Lenses | Scratches, cracks, pitting, distortion or permanent fogging. | Replace the lens or product. Do not keep using damaged lenses. |
| Frames | Cracks, missing side arms, loose hinges or deformation. | Replace if the frame no longer holds securely. |
| Goggle Seals | Splits, hardening, contamination or poor face seal. | Replace if the seal cannot maintain protection. |
| Elastic Straps | Loss of elasticity, fraying or poor adjustment. | Replace strap or eyewear where secure fit is lost. |
| Welding Filters | Cracks, damage, shade marking and auto-darkening performance. | Replace or service before use if performance is uncertain. |
| Laser Eyewear | Wavelength, OD rating, lens damage and marking clarity. | Do not use if rating cannot be verified. |
8. Common Mistakes
Always check HSE directly for the latest guidance before making compliance decisions.
Jaybee Supplies can help you choose safety glasses, goggles, face shields, welding helmets, over-specs, laser eyewear and wider PPE for your workplace.