1. Heat, Flame & Arc Risk
Flame Retardant and Arc Flash Clothing Overview
Flame retardant and arc flash clothing protects workers from the thermal effects of fire, flash fire, arc flash and radiant heat. Unlike ordinary clothing, which may ignite and continue burning, FR clothing is designed to resist ignition, self-extinguish and avoid melting onto the skin.
The aim is to reduce burn severity and give the wearer escape time. It does not make the wearer fireproof, and general FR clothing should not be assumed suitable for electrical arc flash unless it is specifically arc-rated.
Key point: FR and arc-rated clothing are not the same thing. Arc flash work requires garments tested and rated to the correct arc flash standard and energy level.
FR vs Arc Flash Protection
| Protection Type |
Hazard Addressed |
Key Standard |
| Flame Retardant Clothing |
Contact flame, flash fire and molten metal splash. |
EN ISO 11612 |
| Arc Flash Clothing |
Electrical arc flash and intense thermal release. |
EN IEC 61482-2 |
| Welding Clothing |
Welding spatter, UV radiation and flame. |
EN ISO 11611 |
| Anti-Static FR Clothing |
Flammable atmosphere and flame risk. |
EN ISO 11612 + EN 1149-5 |
2. Legal Requirements
Legal and Regulatory Requirements
FR and arc flash clothing must be selected through risk assessment and matched to the specific workplace hazard. In some environments, the assessment may also need to consider electrical risk, welding risk, DSEAR explosive atmosphere duties, flammable substances, molten metal splash or visibility requirements.
| Standard |
What It Covers |
Application |
| EN ISO 11612 |
Heat and flame protection including flash fire, contact flame, radiant heat and molten metal splash. |
General FR, oil and gas, utilities and chemical environments. |
| EN IEC 61482-2 |
Arc flash protection using Box Test Class 1/2 or ATPV open arc ratings. |
Electrical switchgear, HV/LV maintenance and arc-risk tasks. |
| EN ISO 11611 |
Protective clothing for welding and allied processes. |
Welding jackets, trousers, smocks and welding coveralls. |
| EN ISO 14116 |
Limited flame spread. |
Low-risk FR use only. Not suitable for flash fire or arc flash protection. |
| EN 1149-5 |
Anti-static protective clothing. |
Explosive atmosphere and DSEAR environments. |
3. Garment Types
Types of Flame Retardant and Arc Flash Clothing
FR and arc flash clothing can include coveralls, two-piece systems, welding garments, molten metal aprons, FR hi-vis and full arc flash ensembles. The correct garment depends on the hazard, energy level, wearer movement, layering and working environment.
| Garment Type |
Typical Standard |
Key Protection |
| Single-Layer FR Coverall |
EN ISO 11612 |
General flash fire and flame protection. |
| Multi-Layer FR Coverall |
EN ISO 11612 |
Higher thermal protection for sustained heat exposure. |
| FR Jacket and Trousers |
EN ISO 11612 |
Modular protection when waist overlap is maintained. |
| Arc Flash Suit |
EN IEC 61482-2 |
ATPV-rated protection matched to calculated incident energy. |
| Arc Flash Hood or Face Shield |
EN IEC 61482-2 |
Face and neck protection as part of an arc flash ensemble. |
| Welding Jacket or Smock |
EN ISO 11611 |
Protection from welding spatter, flame and allied-process risk. |
| FR Hi-Vis Clothing |
EN ISO 11612 + EN ISO 20471 |
Combined flame protection and high visibility. |
| Anti-Static FR Coverall |
EN ISO 11612 + EN 1149-5 |
FR and anti-static protection for explosive atmospheres. |
A two-piece FR jacket and trouser combination must overlap at the waist by at least 20cm in all body positions, including bending and reaching.
4. Applications
Industry Applications
Flame retardant and arc flash clothing is used across industries where workers may face flash fire, radiant heat, welding spatter, molten metal splash, electrical arc flash or flammable atmospheres.
| Industry / Sector |
Specific Hazard |
Recommended Clothing |
| Oil and Gas |
Hydrocarbon flash fire and arc flash risk. |
EN ISO 11612 FR coverall with EN 1149-5 anti-static protection. |
| Chemical Manufacturing |
Solvent or chemical ignition risk. |
FR coverall, with anti-static clothing where DSEAR applies. |
| LV Electrical Maintenance |
Arc flash up to lower-energy task levels. |
EN IEC 61482-2 arc-rated garments and face protection. |
| HV / MV Electrical Work |
Higher-energy arc flash exposure. |
ATPV-rated arc flash suit matched to incident energy analysis. |
| MIG / MMA Welding |
Welding spatter, flame and UV exposure. |
EN ISO 11611 Class 2 welding clothing. |
| Foundry and Steel Casting |
Molten metal splash and radiant heat. |
EN ISO 11612 Code F clothing and specialist apron where required. |
| Rail Electrification |
Arc flash and trackside visibility risk. |
Arc-rated clothing with EN ISO 20471 Class 3 visibility. |
Jaybee Supplies Can Help Source FR and Arc Flash Clothing
From FR coveralls and welding jackets to arc flash suits, FR hi-vis and anti-static workwear, we can help you compare products based on the task, standard and risk assessment.
Shop PPE Equipment
5. Selection
How to Select the Right FR or Arc Flash Clothing
The right garment should be selected around the hazard, environment and task. For arc flash, an incident energy analysis is needed before specifying garments. Choosing “any arc-rated garment” may leave the wearer under-protected for the specific work location.
Arc flash warning: ATPV must exceed the calculated incident energy at the task distance. The lowest-rated item in the ensemble limits the protection of the whole system.
Selection Checks
- Flash fire: choose EN ISO 11612 garments suitable for the workplace hazard.
- Arc flash: choose EN IEC 61482-2 clothing matched to incident energy analysis.
- Welding: choose EN ISO 11611 clothing, with Class 2 for higher-spatter processes such as MIG and MMA.
- Molten metal: choose EN ISO 11612 Code F and garments that allow rapid removal if splashed.
- DSEAR environments: use FR garments with EN 1149-5 anti-static protection where required.
- Layering: make sure all layers are FR where the risk requires it.
- Two-piece systems: confirm the required waist overlap across the full range of movement.
6. Fit & Maintenance
Fit, Use and Maintenance
FR and arc flash clothing must be worn correctly to perform properly. Open fastenings, rolled sleeves, unsuitable underlayers, contamination and incorrect washing can all reduce or destroy protection.
Correct Use
- Close all fastenings before entering the hazard area, including cuffs, collars, zips and flies.
- Do not roll up sleeves, as this removes arm protection.
- Do not tuck FR trousers inside safety boots where molten splash risk is present.
- Use FR underlayers where the risk assessment requires them.
- Make sure all parts of an arc flash ensemble are correctly rated and compatible.
Washing and Storage
- Wash garments according to the manufacturer’s care label.
- Do not use fabric conditioner, bleach, starch or unapproved stain removers.
- Keep garments away from ignition sources, heat and chemicals during storage.
- Withdraw contaminated garments for correct cleaning before returning them to service.
- Do not repair FR garments with non-FR thread or non-approved materials.
7. Inspection
Inspection and Replacement
FR and arc flash garments should be inspected before use and withdrawn where protection may be compromised. Burn-through, contamination, seam failure, missing care labels or arc damage can all make the garment unsuitable.
| Inspection Point |
What to Check |
Action |
| Seams and Stitching |
Seam damage, open stitching or non-FR repairs. |
Withdraw or repair only through approved methods. |
| Fabric Damage |
Holes, thinning, burns, arc pitting or burn-through. |
Withdraw immediately where protection is compromised. |
| Contamination |
Oil, grease, solvent or flammable liquid soiling. |
Withdraw for decontamination before reuse. |
| Fastenings |
Broken zips, buttons, press studs or hook-and-loop closures. |
Repair or replace before use. |
| Two-Piece Overlap |
Minimum 20cm waist overlap in all working positions. |
Change sizing or garment type if overlap is not maintained. |
| Care Label |
Missing or illegible washing and certification information. |
Withdraw if correct maintenance cannot be confirmed. |
8. Common Mistakes
Common FR and Arc Flash Clothing Mistakes
- Wearing standard clothing under FR coveralls: synthetic or non-FR underlayers can melt if the outer garment is breached.
- Using general FR clothing for arc flash work: EN ISO 11612 clothing is not automatically arc flash rated.
- Skipping incident energy analysis: arc flash garments must be matched to the specific calculated risk.
- Washing with fabric conditioner or bleach: these can reduce or destroy flame-retardant performance.
- Leaving fastenings open: open cuffs, collars and zips expose the wearer to burn risk.
- Continuing to use contaminated garments: oil, grease and solvents can become ignition hazards.
- Assuming EN ISO 14116 is enough for flash fire: it is limited flame spread only and is not suitable for higher-risk flash fire work.
- Mixing arc flash items with different ATPV ratings: the protection of the ensemble is limited by the lowest-rated component.
Useful HSE Resources
Always check HSE directly for the latest guidance before making compliance decisions.