1. Food Clothing Risk
Food Industry Protective Clothing Overview
Food industry protective clothing serves a dual purpose. It helps protect workers from workplace hazards, while also helping protect food products from contamination.
The right clothing may need to support hygiene, cross-contamination control, allergen separation, cold protection, cut resistance, slip reduction, foreign body control and wet or chemical handling tasks.
Key point: standard food-grade overalls do not automatically provide cut protection, chemical resistance or cold insulation. The clothing must be matched to the task and risk.
What Food Protective Clothing Helps Control
| Function |
What It Addresses |
| Worker Protection |
Cuts, cold, wet work, cleaning chemicals, slips and burns. |
| Food Hygiene Barrier |
Helps prevent hair, skin cells and microbial contamination entering food products. |
| Cross-Contamination Control |
Colour-coded clothing helps separate allergens, raw/cooked areas and production zones. |
| Foreign Body Control |
Detectable zips, buttons, elastics and controlled garment design help reduce foreign body incidents. |
2. Legal Requirements
Legal and Regulatory Requirements
Food industry clothing can sit across both health and safety law and food hygiene law. Employers need to consider worker protection, hygiene procedures, contamination controls, laundering, storage and the specific hazards in each food area.
Where clothing is issued as PPE, it should be suitable for the hazard and maintained in good condition. Where clothing is part of food hygiene control, it should also support the site’s food safety management system.
- PPE duties: suitable PPE should be selected, issued, used, maintained and replaced where required.
- Food hygiene duties: clothing should reduce contamination risk and support safe food handling.
- Slip and trip control: footwear should match wet floors, greasy areas, washdown environments and food production tasks.
- Manual handling risk: clothing should not restrict safe movement, lifting or repetitive work.
- Cold environments: suitable thermal clothing should be used for chill rooms, freezers and cold stores.
3. Clothing Types
Types of Food Industry Protective Clothing
Food industry PPE may include coats, overalls, aprons, gloves, footwear, headwear, cold store clothing and disposable items. The correct choice depends on the zone, product, task and hazard.
| Garment / Item |
Key Standard / Control |
Purpose / Use |
| Food-Grade Overall or Coat |
General protective clothing requirements |
General food processing, bakery, dairy, chilled and packing areas. |
| Disposable Coverall |
Single-use hygiene control |
Visitors, allergen changeovers and high-care zone entry. |
| Colour-Coded Overalls |
Food safety management system |
Zone, allergen and raw/cooked segregation. |
| Cold Store Jacket and Salopettes |
Cold environment protection |
Chill rooms, frozen food areas and freezer operations. |
| Cut-Resistant Gloves and Sleeves |
EN 388 / EN ISO 13997 |
Knife work, deboning, filleting, cutting and blade-heavy tasks. |
| Waterproof Aprons |
Wet work and chemical resistance where required |
Wet processing, cleaning, product splash and washdown environments. |
| Food-Grade Safety Boots / Wellies |
EN ISO 20345 |
Wet processing, abattoirs, dairies and slip-risk food production areas. |
| Hearing Protection |
EN 352 |
Packaging and labelling lines where noise exposure is high. |
4. Colour Coding
The Colour-Coding System
Colour-coded clothing helps prevent cross-contamination between production zones, allergen areas and raw or cooked products. It is a food safety management tool, not just a uniform preference.
| Colour |
Zone / Use |
Typical Application |
| White |
General food processing / low care |
Ambient processing, packing and despatch. |
| Blue |
High-care / high-risk zone |
Ready-to-eat areas. |
| Green |
Raw produce / vegetables |
Fruit and vegetable processing. |
| Yellow |
Allergen zone / allergen product |
Areas handling nuts, gluten or declared allergens. |
| Red |
Raw meat handling |
Abattoir, butchery and raw meat processing. |
| Brown / Black |
Non-food / maintenance |
Engineering areas and clothing kept outside food production zones. |
Colour-coding systems vary between businesses. Always follow your organisation’s own food safety and colour-coding policy.
5. Applications
Industry Applications
Food clothing and PPE must be matched to the production environment. Meat, fish, bakery, dairy, frozen food, catering and laboratory settings all create different combinations of hygiene and worker protection needs.
| Food Sector |
Key Hazards |
Required Clothing / PPE |
| Meat Processing / Abattoir |
Knife cuts, blood, cold, slips and noise. |
Cut-resistant gloves, chainmail, cold jacket, wellies and hearing protection. |
| Fish Processing / Filleting |
Knife cuts, wet conditions, cold and slips. |
Cut-resistant gloves, waterproof apron, cold jacket and anti-slip wellies. |
| Bakery / Confectionery |
Heat, flour dust, allergens and burns. |
Food-grade overalls, suitable respiratory protection for flour dust and heat-resistant gloves near ovens. |
| Dairy Processing |
Wet work, cleaning chemicals and slip risk. |
Waterproof apron, safety wellies and chemical-resistant gloves. |
| Frozen Food / Cold Stores |
Extreme cold, slips and restricted movement. |
Cold-rated ensemble, insulated boots and slip-resistant soles. |
| Catering and Hot Food Prep |
Burns, scalds, slips and hygiene risk. |
Burn-resistant gloves, anti-slip safety shoes, aprons and suitable food handling clothing. |
| Food Laboratory / QA |
Chemical reagents and biological samples. |
Chemical-resistant gloves, lab coat and safety goggles. |
Jaybee Supplies Can Help Source Food Industry PPE
From food-grade coats and overalls to colour-coded workwear, cut-resistant gloves, aprons, cold store clothing, safety wellies and hygiene support products, we can help you build practical PPE lists for food production environments.
Shop PPE Equipment
6. Fit & Maintenance
Fit, Use and Maintenance
Food clothing needs to be worn correctly and maintained carefully. Open fastenings, exposed hair, incorrect laundering, mixed-zone storage and damaged garments can all create hygiene and foreign body risks.
Correct Wearing
- Keep clothing fully fastened before entering production areas.
- Make sure hair nets cover all hair, including fringes.
- Use beard snoods where facial hair is present.
- Remove jewellery and watches before entering production areas.
- Do not wear cold store clothing in warm processing areas where condensation may drip onto product.
Laundering and Storage
- Use a validated wash process suitable for the food environment.
- Do not launder production clothing with domestic laundry.
- Keep colour-coded garments washed and stored separately by colour.
- Inspect garments after washing for tears, holes and missing detectable components.
- Store clean clothing away from dirty areas, allergens and personal items.
7. Inspection
Inspection and Replacement
Food industry clothing should be inspected before each shift. Holes, missing fastenings, flattened insulation, worn glove areas, damaged soles and faded colour coding can all create worker safety or food safety problems.
| Inspection Point |
What to Check |
Action |
| Garment Fabric |
Holes, tears, thin areas and loose fibres. |
Remove damaged garments from service immediately. |
| Zips, Buttons and Press Studs |
Missing or loose fastenings. |
Remove immediately because missing components are a foreign body risk. |
| Detectable Components |
Metal-detectable zips, buttons and elastics are present. |
Replace if components are missing or cannot be verified. |
| Cold Store Clothing |
Compressed insulation, wet lining or loss of warmth. |
Replace if cold protection is lost. |
| Cut-Resistant Gloves |
Wear at fingertips, palm and high-contact areas. |
Replace when cut protection or hygiene is compromised. |
| Footwear Soles |
Worn tread, poor slip resistance or damaged uppers. |
Replace before slip risk increases. |
8. Common Mistakes
Common Food Clothing Mistakes
- Wearing the wrong colour in a food zone: colour coding is a food safety control and must match the site policy.
- Using standard overalls for cut protection: knife work needs suitable cut-resistant gloves or sleeves.
- Ignoring missing fastenings: buttons, zip pulls and press studs can become serious foreign body risks.
- Wearing cold store clothing in warm areas: condensation can drip onto food products.
- Laundering production clothing at home: domestic laundering can introduce allergens or bacteria.
- Using latex gloves without checking allergy risk: food handling gloves are often better specified as latex-free nitrile unless there is a reason otherwise.
- Not changing gloves between tasks: gloves must be changed when moving between raw and cooked products, allergen products or non-food surfaces.
Useful Resources
Always check official guidance directly before making compliance decisions.