PPE Knowledge Centre

Safety Footwear

A practical Jaybee Supplies guide to EN ISO footwear categories, safety boots, safety trainers, wellingtons, chainsaw boots, chemical footwear, slip resistance, fit, inspection and replacement.

Guide Type

Knowledge Centre

Topic

Safety Footwear

Audience

Workers & Buyers

Focus

Impact, Slip & Sole Risk

Need help choosing?

Jaybee Supplies can help you compare safety boots, safety trainers, wellington boots, slip-resistant footwear, chemical boots and specialist task footwear.

01282 505043

sales@jaybeesupplies.co.uk

1. Foot Protection Risk

What Is Safety Footwear?

Safety footwear is PPE designed to protect the feet and lower legs from workplace hazards. It is used across construction, logistics, manufacturing, food production, healthcare, agriculture, utilities, forestry and many other working environments.

The correct footwear depends entirely on the hazards present. A safety trainer may suit a clean warehouse, while a wet food production area, construction site, cold store, chemical plant or chainsaw task may require very different protection.

Key point: safety footwear should be hazard-led. The correct choice is based on impact, penetration, slip, water, chemical, thermal, electrical and task-specific risks.

Primary Hazards Addressed

  • Crushing and impact: falling or rolling objects striking the toes or foot.
  • Penetration: nails, glass, metal and sharp objects puncturing the sole.
  • Slipping: wet, oily, contaminated or polished floor surfaces.
  • Cuts and lacerations: chainsaws, blades and sharp machinery.
  • Chemical or liquid exposure: acids, oils, solvents, cleaning chemicals and water ingress.
  • Electrical hazards: static build-up or exposure to live conductors where specialist footwear is needed.
  • Heat and cold: hot surfaces, molten metal splash, outdoor cold and cold store environments.
  • Ankle and metatarsal injuries: impact or crush risk above the toe cap.

3. Standards & Codes

Safety Footwear Standards and Category Codes

All safety footwear sold in the UK should carry suitable UKCA or CE marking. The full category code is normally found inside the tongue, on the insole or on the outer sole, and this code tells you what the footwear is designed to protect against.

Standard Category What It Means
EN ISO 20345 S1–S5 / SB Safety footwear with 200 joule toe cap. The main standard for safety boots and shoes.
EN ISO 20346 P1–P5 / PB Protective footwear with 100 joule toe cap for lower-risk environments.
EN ISO 20347 O1–O5 / OB Occupational footwear with no toe cap. Used for slip resistance and comfort features only.
EN ISO 17249 Class 1–3 Chainsaw protective boots rated by chain speed protection class.
EN 13832 Type 1–3 Chemical-resistant footwear tested against defined chemical exposure.
EN 15090 Type 1–2 Firefighter boots with combined heat, chemical and slip resistance.

Common EN ISO 20345 Codes

Code Meaning Typical Application
SB Basic 200 joule toe cap. Baseline safety footwear protection.
S1 SB plus antistatic properties, energy-absorbing heel and closed heel. Light industry and indoor warehousing.
S1P S1 plus penetration-resistant midsole. Construction, demolition and general site work.
S2 S1 plus water-resistant upper. Outdoor and damp environments.
S3 S2 plus penetration-resistant midsole and cleated outsole. Common minimum for many construction and outdoor roles.
S4 Waterproof polymer or rubber upper with antistatic and energy absorption. Chemical, agriculture and food production.
S5 S4 plus penetration-resistant midsole and cleated outsole. Chemical plants and wet outdoor work.
SRC Slip resistance tested on ceramic tile and steel. Workplaces where dual slip resistance is needed.
M Metatarsal protection over the top of the foot. Steel erection, quarrying and heavy fabrication.
HRO / CI / HI Heat-resistant outsole, cold insulation or heat insulation. Hot works, cold stores and thermal environments.

4. Footwear Types

Types of Safety Footwear

Safety footwear ranges from lightweight safety trainers to rubber chemical boots and specialist chainsaw footwear. Type selection should match both the hazard and the working environment.

Footwear Type Typical Standard Primary Use
Safety Boot EN ISO 20345 S1P–S3 Construction, engineering and logistics.
Safety Trainer or Shoe EN ISO 20345 S1–S3 Warehousing, light manufacturing and retail environments.
Safety Wellington Boot EN ISO 20345 S4–S5 Agriculture, food, utilities, wet yards and groundswork.
Rigger Boot EN ISO 20345 S1P Construction and plant operation where pull-on convenience is needed.
Metatarsal Boot EN ISO 20345 S3 + M Steel erection, quarrying and heavy fabrication.
Chainsaw Boot EN ISO 17249 Class 1–3 Arboriculture, forestry and groundswork.
Chemical-Resistant Boot EN ISO 20345 + EN 13832 Chemical plants, laboratories, agriculture and washdown areas.
Cold Store Boot EN ISO 20345 S3 CI Cold stores, frozen food and outdoor winter work.
Foundry or Hot Works Boot EN ISO 20345 S3 HRO Foundry, steel, roofing and hot surfaces.
Antistatic or ESD Footwear EN ISO 20345 AS / ESD Electronics, cleanrooms and explosive-atmosphere controls.

Rigger boots can be convenient, but they provide limited ankle support. Where ankle protection is required, a suitable lace-up boot should be specified instead.

5. Applications

Industry Applications

Safety footwear requirements vary widely by sector. A dry warehouse, wet food factory, muddy groundwork site, cold store, chemical plant and forestry task all need different footwear characteristics.

Industry / Sector Primary Hazards Recommended Footwear / Code
Construction Falling objects, nails and wet surfaces. EN ISO 20345 S3 SRC.
Steel Erection Dropped steel and metatarsal crush risk. EN ISO 20345 S3 M SRC.
Civil Engineering / Groundworks Nails, wet mud and plant movement. S3 WR boot or suitable safety wellington.
Logistics / Warehousing Pallets, flat surfaces and forklift activity. S1P SRC safety trainer or boot.
Food Processing Wet floors and cleaning chemicals. S4 SRC waterproof wellington or food-safe footwear.
Cold Store / Frozen Food Sub-zero temperatures and slip risk. S3 CI SRC insulated boot.
Forestry / Arboriculture Chainsaw contact and rough terrain. EN ISO 17249 chainsaw boot with ankle support.
Foundry / Steel Works Molten splash, heat and sharp debris. S3 HRO with quick-release fastening.
Chemical Industry Acid, alkali or chemical immersion. S5 plus EN 13832 Type 2/3 where required.
Road / Rail Maintenance Outdoor work, traffic and heavy machinery. S3 WR SRC and visibility requirements where applicable.

Jaybee Supplies Can Help Source Safety Footwear

From S3 safety boots and slip-resistant trainers to food-safe wellingtons, chemical boots, cold store footwear, chainsaw boots and metatarsal protection, we can help you match footwear to the hazard and working environment.

Shop PPE Equipment

6. Selection

How to Select the Right Safety Footwear

Safety footwear procurement is often driven by price, comfort or habit. The safer approach is hazard-led: identify every foot hazard present, then select footwear with the minimum code and features needed to address those risks.

Selection principle: choose footwear by task, floor surface, contamination risk, penetration risk, weather, chemical exposure, thermal exposure and wearer needs.

Hazard Checks

  • Falling objects: decide whether a 200 joule toe cap is required.
  • Sharp objects underfoot: specify penetration-resistant midsole protection.
  • Wet, oily or smooth floors: check the slip-resistance rating and the real floor surface.
  • Outdoor and wet work: specify water resistance, waterproofing or wellington-style footwear.
  • Chemical exposure: match boot material to the chemical, concentration and exposure time.
  • Heat or cold: look for HRO, HI or CI as required.
  • Electrical risk: confirm whether ESD, antistatic or electrically insulating footwear is needed.
  • Chainsaw work: specify EN ISO 17249 footwear, not ordinary safety boots.

Common Code Examples

  • Wet construction site with nail risk: S3 SRC minimum.
  • Cold store worker: S3 CI SRC.
  • Steel erector: S3 M SRC.
  • Chemical plant worker with hot surfaces: S3 HRO AS SRC, with chemical resistance where required.
  • Food production washdown area: S4 or S5 safety wellington depending on penetration and tread needs.

Wearer Considerations

  • Fit and sizing: measure both feet and fit the larger foot.
  • Toe clearance: allow around 10–12mm space at the toe.
  • Shift length: long shifts may need better cushioning and removable insoles.
  • Medical needs: conditions such as diabetes, plantar fasciitis or bunions may require occupational health input.
  • Socks: suitable work socks help reduce rubbing, moisture and blister risk.

7. Fit & Maintenance

Fit, Use and Maintenance

Safety footwear must fit properly and be maintained correctly. Poor fit can cause fatigue, blisters and musculoskeletal problems, while damaged or poorly maintained footwear may no longer provide the protection shown on the product marking.

Correct Fit

  1. Fit footwear near the end of the day where possible, as feet can swell during a shift.
  2. Allow 10–12mm clearance between the longest toe and the end of the toe cap.
  3. Make sure the heel sits firmly with minimal slipping.
  4. Lace boots fully to support the ankle and reduce trip risk.
  5. Re-check fit when a worker changes role, worksite or footwear brand.

Correct Use

  1. Wear safety footwear throughout hazardous areas, not only during heavy tasks.
  2. Do not cut, stretch or modify safety footwear.
  3. Replace worn or broken laces before they create trip risk.
  4. Use suitable socks and liners with wellington boots.
  5. Retire chainsaw boots immediately if the chain contacts the protective area.

Cleaning and Storage

  1. Remove mud and contaminants regularly, especially from tread patterns.
  2. Dry wet boots naturally at room temperature.
  3. Avoid radiators and direct heat, as they can warp soles and damage leather.
  4. Clean rubber boots with mild detergent and inspect flex points for cracking.
  5. Store footwear in a cool, dry place away from direct sunlight and chemicals.

8. Inspection

Inspection and Replacement

Footwear wears gradually, which makes deterioration easy to miss. Heavy-use footwear should be checked regularly, and footwear should be replaced whenever the protective function is uncertain.

Inspection Point What to Check Action
Outsole Tread depth, smooth areas, cuts and embedded debris. Replace when slip resistance is compromised.
Midsole Compression, deformation or puncture damage. Replace if penetration resistance or cushioning is uncertain.
Toe Cap Area Deformation, cracking or damage above the toe cap. Replace if toe cap integrity is uncertain.
Upper Cracks, splits, tears, delamination and failed seams. Replace where water, chemical or structural protection is lost.
Laces and Fasteners Fraying, breakage, loose eyelets or failing closures. Replace laces or footwear before use.
Chemical Boots Swelling, discolouration, stiffening or cracking. Replace if chemical resistance may be compromised.
Chainsaw Boots Any chain contact or damage to protective layers. Withdraw immediately after chain contact.

9. Common Mistakes

Common Safety Footwear Mistakes

  • Selecting by comfort or style instead of hazard: footwear must meet the required protection code for the task.
  • Specifying S1 on a wet or outdoor site: S1 has no water-resistant upper and no cleated sole.
  • Assuming antistatic means electrically insulating: AS and ESD footwear dissipate static; they do not protect against live conductors.
  • Continuing to use worn soles: slip ratings apply to suitable tread condition, not smooth worn-out soles.
  • Using rigger boots where ankle support is needed: lace-up boots are usually better where ankle protection is required.
  • Wearing chainsaw boots after chain contact: protective layers are single-use after contact and must be replaced.
  • Using shared footwear without fitting: poor fit increases blister, fatigue and injury risk.
  • Drying boots on radiators: direct heat can damage leather, adhesives and soles.

Need Safety Footwear for Your Team?

Jaybee Supplies can help you choose safety boots, safety trainers, wellington boots, cold store boots, chemical-resistant footwear, chainsaw boots and wider PPE for your workplace.

Call 01282 505043

sales@jaybeesupplies.co.uk

Smart Online Portal