1. Visibility Risk
Hi-Vis Clothing Overview
High-visibility clothing makes workers more conspicuous to drivers, plant operators, train operators and other people working nearby. It is used where there is a risk of workers being struck by moving vehicles, mobile plant, trains, forklifts or site traffic.
Hi-vis clothing works by combining fluorescent background fabric for daytime visibility with retroreflective tape for low-light, night-time and headlight-illuminated visibility. Both parts matter. A garment with faded fabric or damaged reflective tape may no longer perform as intended.
Key point: hi-vis increases conspicuity, but it does not guarantee the wearer will be seen. It must be used alongside traffic management, physical segregation, safe site layout and clear systems of work.
Primary Hazards Addressed
- Workplace transport: forklifts, loading shovels, telehandlers, dumpers and reversing vehicles.
- Road traffic: road works, traffic management, emergency scenes and live carriageways.
- Rail environments: on-track work, possession working and maintenance near rail vehicles.
- Low light conditions: night work, dark mornings, poor weather and indoor yards.
- Mixed pedestrian and plant areas: construction sites, yards, ports, logistics hubs and depots.
Important: hi-vis must be the outermost visible layer. Wearing a hi-vis vest underneath a dark coat, harness, tool belt or non-hi-vis waterproof layer removes much of its purpose.
2. Legal Requirements
Legal and Regulatory Requirements
High-visibility clothing should be selected through risk assessment and supplied where workers need to be clearly visible to drivers, plant operators or other moving equipment. Employers should ensure garments are suitable for the risk, worn correctly, maintained, cleaned and replaced when performance is reduced.
Sector rules, client requirements and principal contractor standards may exceed the minimum. Road works, railway environments, ports, airports and high-traffic construction sites often set specific garment class, colour and design requirements.
Useful HSE Guidance
3. Classification
EN ISO 20471 Hi-Vis Classes
EN ISO 20471 classifies high-visibility clothing by the minimum area of fluorescent background material and retroreflective material. The higher the class, the greater the visible area and the greater the conspicuity provided by the garment.
| Class |
Minimum Fluorescent Area |
Minimum Retroreflective Area |
Typical Garment |
| Class 1 |
0.14 m² |
0.10 m² |
Lowest visibility. Limited use cases only. |
| Class 2 |
0.50 m² |
0.13 m² |
Vests and waistcoats for general construction, logistics and lower-risk environments. |
| Class 3 |
0.80 m² |
0.20 m² |
Maximum visibility. Jackets, coveralls and garments for road, rail and high-traffic work. |
Note: Class must be based on risk assessment. Class 2 is not suitable for live traffic, high-risk road works or many high-plant environments where Class 3 is required or expected.
4. Garment Types
Types of Hi-Vis Clothing
Different garments provide different levels of visibility. The garment type should match the task, weather, wearer movement, traffic risk and required EN ISO 20471 class.
| Garment Type |
Typical Class |
Primary Use |
| Hi-Vis Waistcoat / Tabard |
Class 2 |
General construction, warehousing and visitor use. |
| Hi-Vis Vest |
Class 2 |
Construction, logistics, yards and traffic management support tasks. |
| Hi-Vis Bomber / Fleece Jacket |
Class 3 |
Outdoor workers in cold or wet conditions. |
| Hi-Vis Waterproof Jacket |
Class 3 |
Road works, rail, groundworks, utilities and year-round outdoor work. |
| Hi-Vis Coverall / Boilersuit |
Class 3 |
High-risk traffic environments, rail, roads and full-body visibility needs. |
| Hi-Vis Trousers |
Class 1 supplement |
Worn with a suitable jacket to help achieve combined Class 3 protection. |
| Hi-Vis T-Shirt / Polo |
Class 2 |
Summer construction, warehouse, events and lighter-duty tasks. |
| Rail-Spec Hi-Vis |
Class 3 orange |
Network Rail on-track and possession working where specified. |
5. Applications
Industry Applications and Minimum Class
Hi-vis requirements vary by sector. Always check the principal contractor, client, site operator or network operator requirements because many workplaces specify a higher class or specific colour above the general minimum.
| Industry / Environment |
Minimum Class |
Notes |
| Highway Road Works |
Class 3 |
Yellow EN ISO 20471 Class 3 is expected for operatives in or near live traffic. |
| Railway Infrastructure |
Class 3 |
Orange rail-spec garments may be required. Check current rail operator requirements. |
| General Construction |
Class 2 minimum |
Many principal contractors require Class 3 on active sites. |
| Construction Plant Areas |
Class 3 |
Best practice where pedestrians and moving plant share space. |
| Airports / Airside |
Class 3 |
Aerodrome operators may specify orange or yellow Class 3 garments. |
| Ports and Docklands |
Class 3 |
High volumes of plant, HGVs and vehicle movements. |
| Logistics and Distribution Yards |
Class 2 minimum |
Class 3 may be required where reversing HGVs or heavy plant are present. |
| Warehousing / Forklift Areas |
Class 2 |
Class 3 should be considered where forklift density is high. |
| Emergency Services Scene Work |
Class 3 |
Used when working near traffic at incident scenes. |
Jaybee Supplies Can Help Source Hi-Vis PPE
From hi-vis vests and waistcoats to Class 3 jackets, waterproofs, trousers, rail-spec orange garments, coveralls and personalised workwear, Jaybee Supplies can help your team choose suitable high-visibility clothing.
Shop PPE Equipment
6. Selection
How to Select the Right Hi-Vis Clothing
The correct hi-vis garment should be chosen by risk assessment. A Class 2 vest may be acceptable for lower-risk indoor or general construction tasks, but it may be unsuitable for road works, rail, high-speed traffic, high-plant areas or night-time working.
Selection principle: identify the visibility risk first, then choose the correct class, colour, garment type, weather protection, fit, outer-layer arrangement and compatibility with other PPE.
Selection Checks
- Live traffic and road works: Class 3 garments should be used for operatives in or near live traffic.
- Rail work: check current rail operator and Network Rail requirements, including colour.
- Construction with plant: Class 3 is best practice where pedestrians and plant operate close together.
- Warehouses and logistics yards: Class 2 may be the minimum, with Class 3 considered in high-plant or HGV areas.
- Outer layer rule: hi-vis must be the visible outermost garment.
- Two-piece combinations: a suitable jacket and trousers may combine to achieve a higher class if marked accordingly.
- Weather conditions: outdoor workers may need Class 3 waterproof jackets, insulated jackets or coveralls.
- Colour contrast: yellow, orange or other colours should be chosen based on background, sector rules and visibility needs.
Questions Before Buying
- What class is required? Check EN ISO 20471 marking and site requirements.
- What colour is required? Some sectors specify yellow or orange.
- Will other PPE obscure the garment? Harnesses, tool belts and rucksacks can cover reflective tape.
- Will the garment be worn in rain or cold? A vest may not be enough if workers cover it with a non-hi-vis coat.
- How often will it be washed? Washing cycles and soiling affect performance and replacement frequency.
7. Fit & Care
Fit, Use and Maintenance
Hi-vis garments only perform as intended when they are worn correctly, fastened properly, kept clean and not covered by other layers or equipment. Poor fit, open fastenings, fading, dirt and damaged tape can all reduce visibility.
Correct Use
- Wear as the outer layer: hi-vis must not be hidden under a coat, hoodie or waterproof.
- Fasten the garment: waistcoats, tabards and jackets should be closed to maintain the visible area.
- Keep tape visible: retroreflective tape should not be obscured by harness straps, tool belts or equipment.
- Use suitable sizing: garments should allow movement without hanging loose or creating snag risks.
- Match the weather: use hi-vis waterproofs or insulated garments rather than covering a vest with a dark coat.
Washing and Storage
- Wash at the temperature stated by the manufacturer, commonly 40–60°C depending on garment instructions.
- Do not use bleach, fabric conditioner or optical brighteners.
- Do not tumble dry on high heat because this can damage retroreflective tape.
- Store away from direct sunlight because UV can fade fluorescent dyes.
- After washing, check the retroreflective tape still reflects when tested with a torch.
- Follow the maximum wash count and care label instructions supplied with the garment.
8. Inspection
Inspection and Replacement
High-visibility clothing should be inspected regularly and replaced when it is faded, heavily soiled, damaged, no longer reflective or unable to fasten. A garment may still be physically wearable while no longer providing the required visibility performance.
| Inspection Point |
What to Check |
Action |
| Fluorescent Fabric |
Fading, staining, soiling or loss of brightness. |
Replace if visibility is reduced. |
| Retroreflective Tape |
Peeling, cracking, discolouration or loss of reflectivity. |
Replace tape or garment if performance is lost. |
| Fastenings |
Zips, press studs, Velcro and closures. |
Replace if the garment cannot be closed securely. |
| Seams and Stitching |
Splitting, tears, open seams or damaged panels. |
Repair only if performance is not affected, otherwise replace. |
| Cleanliness |
Mud, grease, oil, dust or staining that reduces visibility. |
Clean or replace if soiling cannot be removed. |
| Correct Class |
Garment is the correct class for the task and environment. |
Issue the correct class before work starts. |
Replacement Triggers
- Faded fluorescent fabric: replace because the garment may no longer achieve the required class.
- Heavily soiled garments: replace if cleaning cannot restore visibility.
- Peeling or dull reflective tape: replace tape or garment if retroreflective performance is reduced.
- Broken fastenings: replace because the visible area may not be achieved when worn open.
- High wash count: inspect carefully after repeated washing and follow the manufacturer’s maximum wash guidance.
9. Common Mistakes
Common Hi-Vis Clothing Mistakes
| Common Mistake |
Why It Matters / Correct Practice |
| Wearing hi-vis under a non-hi-vis outer layer |
This gives little or no visibility benefit. Hi-vis must be the outermost visible layer. |
| Using Class 2 in live traffic or road works |
Class 3 is required or expected in high-risk road work environments. |
| Using faded or soiled garments |
Fading and soiling reduce fluorescent and reflective performance. |
| Assuming hi-vis is the only control needed |
Traffic management, physical segregation and safe systems of work must come first. |
| Harness straps covering reflective tape |
Where harnesses and hi-vis are worn together, reflective tape should remain visible. |
| Not checking the correct colour |
Colour should suit the background and sector rules. Rail and road environments may have specific requirements. |
| Washing with bleach or fabric conditioner |
These can degrade fluorescent and retroreflective performance before obvious fading is visible. |
| Wearing garments open |
Open vests and jackets may reduce the visible area and affect the intended class. |
10. Resources
Training and Further Resources
Workers should be trained on when hi-vis is required, what class is needed, how to wear it correctly, how to keep it visible, how to wash it and when to remove it from use.
Always check official guidance directly before making compliance decisions.
Internal Resources to Add
- PPE risk assessment template.
- Hi-vis issue and inspection record.
- Site traffic management plan.
- Garment washing and replacement policy.
- Client or principal contractor PPE requirements.
- Rail, road or airport-specific garment colour requirements where applicable.
Document Review Log
Use this space internally to record future content reviews, compliance checks or product updates.
| Version |
Date |
Reviewed By |
Changes Made |
| 1.0 |
May 2026 |
Jaybee Supplies |
Initial Knowledge Centre page created. |
|
|
|
|
|
|
|
|