PPE Knowledge Centre

Ear Defenders & Hearing Protection

A practical Jaybee Supplies guide to hearing protection, SNR selection, workplace noise action levels, earplug and earmuff types, fitting, inspection and common mistakes across UK workplaces.

Guide Type

Knowledge Centre

Topic

Hearing Protection

Audience

Workers & Buyers

Focus

Noise, SNR & Fit

Need help choosing?

Jaybee Supplies can help you compare ear defenders, earplugs and hearing protection options for your workplace.

01282 505043

sales@jaybeesupplies.co.uk

1. Hearing Risk

What Is Hearing Protection?

Hearing protection reduces the level of noise reaching the inner ear. It is used where workplace noise still presents a risk after other controls have been considered, such as quieter equipment, isolation, enclosure, maintenance, rotation, zoning and process changes.

Noise-induced hearing loss is permanent and irreversible. Once hearing is damaged, it cannot be restored, which is why correct selection, fitting and consistent use matter so much.

Key point: hearing protection should not be chosen simply by picking the highest SNR available. Too much attenuation can isolate workers from alarms, warning calls, reversing vehicles and machinery cues.

2. Legal Noise Levels

Noise Action Levels at Work

The Control of Noise at Work Regulations 2005 set exposure action values and an exposure limit value. These levels help determine when employers must provide information, training, hearing protection, hearing protection zones and health surveillance.

Action Level Exposure Value Employer Obligation
Lower Exposure Action Value 80 dB(A) LEP,d / 135 dB(C) peak Provide hearing protection on request. Provide information and training.
Upper Exposure Action Value 85 dB(A) LEP,d / 137 dB(C) peak Set hearing protection zones, make use mandatory and consider health surveillance.
Exposure Limit Value 87 dB(A) LEP,d / 140 dB(C) peak Must not be exceeded, taking account of the attenuation from protection worn.

3. Standards

EN 352 Hearing Protection Standards

The EN 352 series covers different types of hearing protection, including earmuffs, earplugs, helmet-mounted protection, level-dependent protection, active noise reduction and communication products.

Earmuffs

Over-head earmuffs are covered by EN 352-1. Helmet-mounted earmuffs are covered by EN 352-3.

Earplugs

Disposable foam, reusable pre-moulded and banded earplugs are covered by EN 352-2.

Smart Protection

Level-dependent earmuffs fall under EN 352-4, while active noise reduction earmuffs are covered by EN 352-5.

Communication

Communication earmuffs with audio input are covered by EN 352-6. Level-dependent earplugs are covered by EN 352-7.

4. Product Types

Types of Ear Defenders and Hearing Protection

The best product depends on the noise level, exposure time, comfort, hygiene, communication needs, compatibility with other PPE and whether workers need to remove and reinsert protection often.

Type Typical Standard Best For
Disposable Foam Earplugs EN 352-2 Continuous high-noise work and high-volume disposable use.
Reusable Earplugs EN 352-2 Intermittent noise and frequent removal and reinsertion.
Banded Earplugs EN 352-2 Short-duration entry into noisy areas where plugs need to be removed often.
Over-Head Earmuffs EN 352-1 General industrial use and simple issue across mixed workforces.
Helmet-Mounted Earmuffs EN 352-3 Construction, forestry and any area where a safety helmet is also worn.
Communication Earmuffs EN 352-6 Radio communication during noisy tasks, plant operation and team coordination.

Jaybee Supplies Can Help Source Hearing Protection

From disposable earplugs and reusable plugs to helmet-mounted ear defenders and communication earmuffs, we can help you choose products that fit the role rather than simply chasing the highest SNR figure.

Shop PPE Equipment

5. Selection

How to Select the Right Hearing Protection

SNR stands for Single Number Rating. It gives a general indication of the protection level, but it should not be used blindly. The aim is to reduce noise to a safer level without cutting workers off from essential warning sounds.

Simple working estimate: noise at the ear ≈ workplace dB(A) − (SNR × 0.6). For example, 95 dB(A) with SNR 30 gives an estimated 77 dB(A) at the ear.

  • Continuous noise: foam earplugs or standard earmuffs.
  • Frequent removal: reusable pre-moulded or banded plugs.
  • Communication required: level-dependent or communication earmuffs.
  • Hard hat required: helmet-mounted earmuffs.
  • Very high noise: double protection may be required, such as plugs and muffs together.

6. Fit & Use

Fitting Earplugs and Earmuffs Correctly

Even high-quality hearing protection can fail if it is worn incorrectly. A poor seal, shallow earplug insertion or protection removed during exposure can dramatically reduce real-world performance.

Foam Earplug Fitting

  1. Roll the plug between clean, dry fingers until it becomes narrow and cylindrical.
  2. Pull the outer ear upward and backward to straighten the ear canal.
  3. Insert deeply and hold in place for 20–30 seconds while the foam expands.

Earmuff Fitting

  1. Position the cups centrally over the ears so the cushion seals fully around each ear.
  2. Keep hair, glasses arms, clothing and helmet parts out from under the cushion seal.
  3. Wear protection for the full exposure period. Brief removal in high noise can sharply reduce daily protection.

7. Inspection

Inspection, Cleaning and Replacement

Hearing protection should be checked regularly because worn cushions, damaged cups, poor headband tension and contaminated plugs can all reduce performance.

Inspection Point What to Check Action
Earmuff Cushions Cracking, hardening, flattening or loss of seal. Replace cushions where the acoustic seal is compromised.
Headband Tension Loose fit or weak pressure against the head. Replace the earmuff if the headband no longer maintains tension.
Foam Earplugs Failure to expand, dirt or previous use. Discard after use. Foam plugs are single-use hygiene items.
Reusable Earplugs Tears, hardening, deformation or contamination. Clean as instructed and replace when damaged.

8. Common Mistakes

Common Hearing Protection Mistakes

  • Choosing the highest SNR automatically: over-protection can stop workers hearing alarms, instructions and machinery cues.
  • Poor foam plug insertion: shallow insertion can provide far less protection than the rated figure.
  • Removing protection briefly: short unprotected periods in high noise can seriously reduce daily protection.
  • Breaking the earmuff seal: glasses, hair, hoods and helmet parts can create gaps.
  • Not replacing worn cushions: hardened cushions do not seal correctly.
  • No noise risk assessment: without measurement, protection may be too weak or too strong.

Useful HSE Resources

Always check HSE directly for the latest guidance before making compliance decisions.

Need Hearing Protection for Your Team?

Jaybee Supplies can help you choose ear defenders, earplugs and wider PPE for construction, manufacturing, warehousing, forestry, engineering, utilities, recycling and other noisy working environments.

Call 01282 505043

sales@jaybeesupplies.co.uk

Smart Online Portal