PPE Knowledge Centre
Safety Footwear
A practical Jaybee Supplies guide to EN ISO footwear categories, safety boots, safety trainers, wellingtons, chainsaw boots, chemical footwear, slip resistance, fit, inspection and replacement.
PPE Knowledge Centre
A practical Jaybee Supplies guide to EN ISO footwear categories, safety boots, safety trainers, wellingtons, chainsaw boots, chemical footwear, slip resistance, fit, inspection and replacement.
Guide Type
Knowledge Centre
Topic
Safety Footwear
Audience
Workers & Buyers
Focus
Impact, Slip & Sole Risk
1. Foot Protection Risk
Safety footwear is PPE designed to protect the feet and lower legs from workplace hazards. It is used across construction, logistics, manufacturing, food production, healthcare, agriculture, utilities, forestry and many other working environments.
The correct footwear depends entirely on the hazards present. A safety trainer may suit a clean warehouse, while a wet food production area, construction site, cold store, chemical plant or chainsaw task may require very different protection.
Key point: safety footwear should be hazard-led. The correct choice is based on impact, penetration, slip, water, chemical, thermal, electrical and task-specific risks.
2. Legal Requirements
Safety footwear must be selected through risk assessment and supplied where foot hazards cannot be adequately controlled by other means. Employers should ensure the footwear is suitable for the task, properly maintained, correctly used and replaced when protection is compromised.
The choice may also need to account for sector-specific risks such as construction site penetration hazards, COSHH chemical exposure, electrical work, slip and trip controls, chainsaw use, cold environments and wet food production areas.
3. Standards & Codes
All safety footwear sold in the UK should carry suitable UKCA or CE marking. The full category code is normally found inside the tongue, on the insole or on the outer sole, and this code tells you what the footwear is designed to protect against.
| Standard | Category | What It Means |
|---|---|---|
| EN ISO 20345 | S1–S5 / SB | Safety footwear with 200 joule toe cap. The main standard for safety boots and shoes. |
| EN ISO 20346 | P1–P5 / PB | Protective footwear with 100 joule toe cap for lower-risk environments. |
| EN ISO 20347 | O1–O5 / OB | Occupational footwear with no toe cap. Used for slip resistance and comfort features only. |
| EN ISO 17249 | Class 1–3 | Chainsaw protective boots rated by chain speed protection class. |
| EN 13832 | Type 1–3 | Chemical-resistant footwear tested against defined chemical exposure. |
| EN 15090 | Type 1–2 | Firefighter boots with combined heat, chemical and slip resistance. |
| Code | Meaning | Typical Application |
|---|---|---|
| SB | Basic 200 joule toe cap. | Baseline safety footwear protection. |
| S1 | SB plus antistatic properties, energy-absorbing heel and closed heel. | Light industry and indoor warehousing. |
| S1P | S1 plus penetration-resistant midsole. | Construction, demolition and general site work. |
| S2 | S1 plus water-resistant upper. | Outdoor and damp environments. |
| S3 | S2 plus penetration-resistant midsole and cleated outsole. | Common minimum for many construction and outdoor roles. |
| S4 | Waterproof polymer or rubber upper with antistatic and energy absorption. | Chemical, agriculture and food production. |
| S5 | S4 plus penetration-resistant midsole and cleated outsole. | Chemical plants and wet outdoor work. |
| SRC | Slip resistance tested on ceramic tile and steel. | Workplaces where dual slip resistance is needed. |
| M | Metatarsal protection over the top of the foot. | Steel erection, quarrying and heavy fabrication. |
| HRO / CI / HI | Heat-resistant outsole, cold insulation or heat insulation. | Hot works, cold stores and thermal environments. |
4. Footwear Types
Safety footwear ranges from lightweight safety trainers to rubber chemical boots and specialist chainsaw footwear. Type selection should match both the hazard and the working environment.
| Footwear Type | Typical Standard | Primary Use |
|---|---|---|
| Safety Boot | EN ISO 20345 S1P–S3 | Construction, engineering and logistics. |
| Safety Trainer or Shoe | EN ISO 20345 S1–S3 | Warehousing, light manufacturing and retail environments. |
| Safety Wellington Boot | EN ISO 20345 S4–S5 | Agriculture, food, utilities, wet yards and groundswork. |
| Rigger Boot | EN ISO 20345 S1P | Construction and plant operation where pull-on convenience is needed. |
| Metatarsal Boot | EN ISO 20345 S3 + M | Steel erection, quarrying and heavy fabrication. |
| Chainsaw Boot | EN ISO 17249 Class 1–3 | Arboriculture, forestry and groundswork. |
| Chemical-Resistant Boot | EN ISO 20345 + EN 13832 | Chemical plants, laboratories, agriculture and washdown areas. |
| Cold Store Boot | EN ISO 20345 S3 CI | Cold stores, frozen food and outdoor winter work. |
| Foundry or Hot Works Boot | EN ISO 20345 S3 HRO | Foundry, steel, roofing and hot surfaces. |
| Antistatic or ESD Footwear | EN ISO 20345 AS / ESD | Electronics, cleanrooms and explosive-atmosphere controls. |
Rigger boots can be convenient, but they provide limited ankle support. Where ankle protection is required, a suitable lace-up boot should be specified instead.
5. Applications
Safety footwear requirements vary widely by sector. A dry warehouse, wet food factory, muddy groundwork site, cold store, chemical plant and forestry task all need different footwear characteristics.
| Industry / Sector | Primary Hazards | Recommended Footwear / Code |
|---|---|---|
| Construction | Falling objects, nails and wet surfaces. | EN ISO 20345 S3 SRC. |
| Steel Erection | Dropped steel and metatarsal crush risk. | EN ISO 20345 S3 M SRC. |
| Civil Engineering / Groundworks | Nails, wet mud and plant movement. | S3 WR boot or suitable safety wellington. |
| Logistics / Warehousing | Pallets, flat surfaces and forklift activity. | S1P SRC safety trainer or boot. |
| Food Processing | Wet floors and cleaning chemicals. | S4 SRC waterproof wellington or food-safe footwear. |
| Cold Store / Frozen Food | Sub-zero temperatures and slip risk. | S3 CI SRC insulated boot. |
| Forestry / Arboriculture | Chainsaw contact and rough terrain. | EN ISO 17249 chainsaw boot with ankle support. |
| Foundry / Steel Works | Molten splash, heat and sharp debris. | S3 HRO with quick-release fastening. |
| Chemical Industry | Acid, alkali or chemical immersion. | S5 plus EN 13832 Type 2/3 where required. |
| Road / Rail Maintenance | Outdoor work, traffic and heavy machinery. | S3 WR SRC and visibility requirements where applicable. |
From S3 safety boots and slip-resistant trainers to food-safe wellingtons, chemical boots, cold store footwear, chainsaw boots and metatarsal protection, we can help you match footwear to the hazard and working environment.
6. Selection
Safety footwear procurement is often driven by price, comfort or habit. The safer approach is hazard-led: identify every foot hazard present, then select footwear with the minimum code and features needed to address those risks.
Selection principle: choose footwear by task, floor surface, contamination risk, penetration risk, weather, chemical exposure, thermal exposure and wearer needs.
7. Fit & Maintenance
Safety footwear must fit properly and be maintained correctly. Poor fit can cause fatigue, blisters and musculoskeletal problems, while damaged or poorly maintained footwear may no longer provide the protection shown on the product marking.
8. Inspection
Footwear wears gradually, which makes deterioration easy to miss. Heavy-use footwear should be checked regularly, and footwear should be replaced whenever the protective function is uncertain.
| Inspection Point | What to Check | Action |
|---|---|---|
| Outsole | Tread depth, smooth areas, cuts and embedded debris. | Replace when slip resistance is compromised. |
| Midsole | Compression, deformation or puncture damage. | Replace if penetration resistance or cushioning is uncertain. |
| Toe Cap Area | Deformation, cracking or damage above the toe cap. | Replace if toe cap integrity is uncertain. |
| Upper | Cracks, splits, tears, delamination and failed seams. | Replace where water, chemical or structural protection is lost. |
| Laces and Fasteners | Fraying, breakage, loose eyelets or failing closures. | Replace laces or footwear before use. |
| Chemical Boots | Swelling, discolouration, stiffening or cracking. | Replace if chemical resistance may be compromised. |
| Chainsaw Boots | Any chain contact or damage to protective layers. | Withdraw immediately after chain contact. |
9. Common Mistakes
Always check official guidance directly before making compliance decisions.
Jaybee Supplies can help you choose safety boots, safety trainers, wellington boots, cold store boots, chemical-resistant footwear, chainsaw boots and wider PPE for your workplace.