PPE Knowledge Centre

Harness & Fall Arrest Equipment

A practical Jaybee Supplies guide to full body harnesses, fall restraint, fall arrest systems, lanyards, self-retracting lifelines, anchor points, fall clearance, rescue planning, suspension trauma and equipment inspection.

Guide Type

Knowledge Centre

Topic

Fall Protection

Audience

Workers & Buyers

Focus

Harness, Anchor & Rescue

Need help choosing?

Jaybee Supplies can help you source harnesses, lanyards, connectors, fall arrest equipment, anchors, restraint systems and wider working at height PPE.

01282 505043

sales@jaybeesupplies.co.uk

1. Work at Height Risk

Harness and Fall Arrest Equipment Overview

Harness and fall arrest equipment is used to protect workers from the consequences of falling from height. Working at height remains one of the most serious workplace risks, and personal fall protection should only be used after safer options have been considered first.

Fall protection is not one single product. A safe system may include a full body harness, anchor point, connector, lanyard, self-retracting lifeline, fall arrest block, work positioning system, restraint system and rescue equipment. Every component must be compatible with the task, the user, the anchor and the available fall clearance.

Key point: personal fall protection is the last resort. Work should be planned so the risk is eliminated first, then controlled with collective protection such as scaffolding, guard rails or MEWPs before fall arrest PPE is selected.

Key System Types

System Type What It Does When Used
Fall Restraint Prevents the worker from reaching a fall edge by restricting movement. Used where the fall can be physically prevented.
Work Positioning Supports the worker in tension while working at height. Common in rope access, utility pole work and some specialist height tasks.
Fall Arrest Stops a fall after it has already started. Used only where restraint or collective protection is not practicable.

Important: a rescue plan must be in place before any work at height begins. A suspended worker may experience suspension trauma within minutes, so rescue arrangements cannot be improvised after a fall.

3. Equipment Types

Types of Harness and Fall Arrest Equipment

Fall protection equipment should be selected as a complete system. A full body harness may be suitable, but it will not protect a worker unless the connecting device, anchor point, fall clearance and rescue arrangements are also correct.

Equipment Type Standard Key Feature / Use
Full Body Harness EN 361 Required for fall arrest. Designed to distribute arrest forces across the body.
Single-Leg Energy-Absorbing Lanyard EN 355 A standard fall arrest lanyard with energy absorption to reduce arrest force.
Twin-Leg Lanyard EN 355 Allows 100% tie-off during transitions where one leg remains connected.
Self-Retracting Lifeline EN 360 Arrests a fall quickly and usually needs less fall clearance than a lanyard.
SRL With Rescue Function EN 360 Includes retrieval capability to help raise or lower a fallen worker.
Guided Fall Arrester on Rigid Rail EN 353-1 Used on masts, towers, vertical ladders and fixed climbing systems.
Guided Fall Arrester on Flexible Rope EN 353-2 Used with flexible rope guideline systems.
Work Positioning Belt EN 358 For restraint or positioning only. It is not suitable as fall arrest equipment.
Temporary Anchor Point EN 795 Class B Portable anchor point used where a suitable rated anchor is required.
Horizontal Lifeline EN 795 Class C Allows lateral movement while the worker remains connected.

Important: work positioning belts are not fall arrest equipment. If a worker loses their footing without a separate fall arrest harness and suitable system, they may not be protected.

4. Applications

Industry Applications

Harness and fall arrest requirements vary depending on the work environment. Roofing, steel erection, mast climbing, utilities, MEWP use, rail infrastructure and rope access all involve different hazards, anchor arrangements and rescue considerations.

Industry / Task Work at Height Scenario Typical Equipment
Construction Roofing Pitched roofs, flat roofs and fragile surfaces. EN 361 harness, EN 355 twin-leg lanyard and EN 795 anchor.
Steel Erection Structural steel and leading edge work. EN 361 harness with EN 360 SRL where suitable overhead anchorage is available.
Telecoms and Mast Climbing Lattice masts and monopoles. EN 361 harness with EN 353-1 guided arrester on a rigid rail.
Wind Energy Tower climbing and nacelle access. EN 361 harness, EN 353-1 rail arrester and EN 360 SRL.
MEWPs and Cherry Pickers Boom lift and platform operation. EN 361 harness connected to the MEWP designated anchor point.
Rope Access Inspection and maintenance at height. Dual rope systems for trained and competent personnel.
Utilities Pole climbing and overhead line tasks. EN 361 harness, positioning equipment and rope arrester where suitable.
Rail Infrastructure Viaducts, elevated structures and maintenance access. EN 361 harness, EN 360 SRL, EN 795 anchor or lifeline system.

Jaybee Supplies Can Help Source Fall Protection PPE

From full body harnesses and energy-absorbing lanyards to connectors, fall arrest blocks, self-retracting lifelines, anchor systems and wider PPE, Jaybee Supplies can help your team choose suitable equipment for working at height.

Shop PPE Equipment

5. Selection

How to Select the Right Fall Protection Equipment

Selection should begin with the task, not the product. The first question is whether work at height can be avoided. If it cannot, collective protection should be considered before personal fall protection. Where harness-based PPE is required, the full system must be checked.

Selection principle: confirm the work method, fall distance, anchor position, rescue plan, user competence and equipment compatibility before issuing a harness or lanyard.

Fall Clearance Calculation

A fall arrest lanyard needs enough clear space below the worker for the system to deploy safely. If clearance is insufficient, the worker may still strike the ground, a lower level or an obstruction.

Component Typical Distance
Lanyard Length Up to 1.75m for many EN 355 lanyards.
Energy Absorber Extension Can extend during deployment.
Harness Attachment Position Allow for the position of the dorsal D-ring on the worker.
Safety Margin Add a suitable safety margin beneath the worker.
Total Clearance Often several metres below the anchor point, depending on the system.

Self-retracting lifelines can reduce the required clearance because they arrest a fall quickly. They are often preferred where there is limited space below the worker, provided the equipment is suitable for the application and anchor arrangement.

Rescue Planning Checks

  • Rescue method: decide how a suspended worker will be recovered before work starts.
  • Rescue equipment: make sure suitable rescue kit is available at the work location.
  • Trained rescuers: rescue should be carried out by people trained for the specific scenario.
  • Time critical risk: suspended workers should not be left waiting for an improvised rescue.
  • Emergency access: check site access, communication and emergency arrangements.

HSE: Rescue planning for work at height

6. Fit & Use

Fit, Use and Maintenance

A harness only protects properly when it fits correctly, is connected to a suitable anchor and is used as part of a planned system. Poor donning, loose straps, incorrect anchorage or misused lanyards can turn a safety system into a serious risk.

Donning a Full Body Harness

  1. Hold the harness by the dorsal D-ring and shake out the straps.
  2. Place the shoulder straps over the shoulders with the dorsal D-ring between the shoulder blades.
  3. Fasten the chest strap at mid-chest level.
  4. Fasten and adjust the leg straps so they are snug but not restrictive.
  5. Check there is no twisted webbing, incorrect routing or loose strap ends.
  6. Complete a buddy check so a second person verifies buckles, D-ring position and strap routing.

Correct Use

  • Connect before exposure: attach to a suitable anchor before approaching a fall edge.
  • Maintain tie-off: when using a twin-leg lanyard, keep one leg connected during transitions.
  • Do not extend lanyards: joining lanyards together can increase fall distance beyond safe limits.
  • Use the correct anchor: anchors must be suitable, rated and positioned correctly.
  • Remove after a fall: any equipment involved in a fall arrest event should be withdrawn immediately.

Storage and Care

  • Store harnesses and lanyards clean, dry and away from direct sunlight.
  • Keep equipment away from heat, chemicals, oils, sharp edges and heavy objects.
  • Do not store fall protection equipment loose in vehicle boots where it can be crushed or contaminated.
  • Follow manufacturer cleaning instructions and do not modify webbing, labels, buckles or connectors.

7. Inspection

Inspection and Replacement

Harnesses, lanyards, connectors, SRLs and anchors should be checked before use and withdrawn if there is any doubt about their safety. Fall protection equipment can be weakened by age, impact loading, chemicals, UV exposure, abrasion or hidden damage.

Inspection Point What to Check Action
Webbing Cuts, abrasion, burns, chemical staining, discolouration or fraying. Withdraw if damaged or contaminated.
Stitching Load-bearing seams, D-ring stitching and buckle attachment points. Withdraw if stitching is cut, loose or broken.
Buckles and Hardware Distortion, corrosion, cracking, sharp edges or poor adjustment. Remove from service if function is affected.
Dorsal D-Ring Deformation, corrosion, cracking or incorrect position. Withdraw if damaged or deformed.
Energy Absorber Deployment indicator, torn pack or evidence of loading. Withdraw immediately if deployed.
SRLs Smooth retraction, locking action, damaged casing, cable or webbing. Remove if movement is jerky or lock function is uncertain.
Connectors Gate operation, automatic closing, locking function and corrosion. Withdraw if the gate does not operate correctly.
Service Life Manufacture date, inspection records and manufacturer guidance. Withdraw if outside service life or records are missing.

Replacement Triggers

  • Any fall arrest event: withdraw the equipment even if damage is not visible.
  • Deployed energy absorber: remove from service immediately.
  • Webbing damage: cuts, burns, chemical exposure or heavy abrasion cannot be repaired safely.
  • Hardware damage: distortion, corrosion or gate failure means the item should not be used.
  • Unknown history: withdraw equipment if inspection records or fall history are uncertain.

HSE: Thorough examination of work at height equipment

8. Common Mistakes

Common Harness and Fall Arrest Mistakes

Common Mistake Why It Matters / Correct Practice
No rescue plan before work starts Rescue must be planned in advance. A suspended worker may become incapacitated quickly.
Insufficient clearance below the worker Clearance must be calculated before using a lanyard or fall arrest system.
Using a positioning belt as fall arrest A work positioning belt is not designed to arrest a fall. A proper fall arrest harness and system is required.
Connecting to an unverified anchor Anchors must be suitable for fall arrest. Not every steel beam, scaffold tube or handrail is a safe anchor.
Using equipment after a fall arrest Energy absorbers are single-use. Equipment should be withdrawn after any fall arrest event.
Anchoring below the D-ring Low anchorage can greatly increase fall distance and clearance needs.
Using fall protection without training Incorrect donning, wrong anchor selection or poor clearance calculation can be fatal.
Ignoring suspension trauma risk A motionless suspended worker requires prompt rescue. Suspension trauma should be treated as time critical.

9. Resources

Training and Further Resources

Workers using harnesses and fall arrest equipment should be trained and competent. Training should cover correct selection, pre-use checks, fitting, anchorage, fall clearance, emergency rescue and the limitations of the equipment.

Always check official guidance directly before making compliance decisions.

Document Review Log

Use this space internally to record future content reviews, compliance checks or product updates.

Version Date Reviewed By Changes Made
1.0 May 2026 Jaybee Supplies Initial Knowledge Centre page created.

Need Harness or Fall Arrest Equipment?

Jaybee Supplies can help you source full body harnesses, fall arrest lanyards, self-retracting lifelines, connectors, anchor equipment, restraint systems and wider PPE for working safely at height.

Call 01282 505043

sales@jaybeesupplies.co.uk

Smart Online Portal