PPE Knowledge Centre

Protective Gloves

A practical Jaybee Supplies guide to hand protection, glove standards, cut resistance, chemical protection, heat protection, electrical gloves, anti-vibration gloves, fit, inspection and correct workplace use.

Guide Type

Knowledge Centre

Topic

Protective Gloves

Audience

Workers & Buyers

Focus

Cut, Chemical & Heat Risk

Need help choosing?

Jaybee Supplies can help you compare cut-resistant, chemical-resistant, heat-resistant, cold protection, disposable, electrical and anti-vibration gloves.

01282 505043

sales@jaybeesupplies.co.uk

1. Hand Protection Risk

What Are Protective Gloves?

Protective gloves are PPE worn on the hands to reduce exposure to workplace hazards. They may protect against physical, chemical, biological, thermal, cold, electrical or vibration-related risks, depending on the glove type and standard.

The right glove for a task depends entirely on the hazard. A cut-resistant glove may not protect against chemicals. A chemical glove may not protect against heat. A disposable glove may be suitable for hygiene but unsuitable for sharp edges or prolonged chemical contact.

Key point: there is no universal protective glove. Selection must be based on the specific hazard, task, exposure time, wearer and workplace environment.

Primary Hazards Addressed

  • Mechanical risks: cuts, abrasions, punctures, tears and crushing.
  • Chemical hazards: acids, solvents, oils, cleaning agents and corrosive substances.
  • Heat and fire: hot surfaces, flame contact, welding spatter and molten materials.
  • Cold hazards: low temperatures, cold contact and freezer environments.
  • Biological hazards: bloodborne pathogens, bacteria, viruses and contaminated materials.
  • Electrical hazards: live working and static electricity where specialist gloves are required.
  • Vibration: hand-arm vibration exposure from power tools and vibrating equipment.

3. Standards

Protective Glove Standards

All protective gloves sold in the UK should carry suitable UKCA or CE marking. The relevant standard number and performance marking should be checked on the glove, label or packaging before use.

Standard What It Covers Look For
EN 388 Mechanical risks including abrasion, cut, tear and puncture. Performance code and cut level.
EN ISO 374-1 Chemical and micro-organism protection. Type A/B/C and chemical letter codes.
EN 407 Thermal protection against heat and fire. Flame pictogram and six performance digits.
EN 511 Cold protection including convective cold, contact cold and water permeability. Snowflake pictogram and three performance digits.
EN 60903 Electrical insulating gloves. Double triangle symbol and voltage class.
EN ISO 10819 Anti-vibration gloves. Vibration performance marking.

4. Glove Types

Types of Protective Gloves

Different glove types protect against different hazards. Product choice should always be confirmed against the relevant standard, performance level and task conditions.

Glove Type Typical Material Primary Use
Cut-Resistant Gloves HPPE, Kevlar®, steel fibre or engineered yarns. Engineering, glass handling, sheet metal and blade risk.
Chemical-Resistant Gloves Nitrile, neoprene, butyl, PVC or specialist polymers. Chemical handling, laboratories, cleaning and maintenance.
Heat and Flame Gloves Leather, Kevlar® and thermal-resistant fabrics. Foundry, welding, furnace and hot surface work.
Cold Protection Gloves Insulated leather, lined synthetic materials and thermal layers. Cold stores, outdoor winter work and freezer environments.
Electrical Insulating Gloves Natural rubber or specialist insulating materials. Electrical maintenance and live working where rated protection is required.
Disposable Gloves Nitrile, latex, vinyl or polyethylene. Healthcare, food handling, hygiene and light chemical work.
Anti-Vibration Gloves Multi-layer foam, gel or vibration-damping materials. Power tools, breakers, grinders and vibrating equipment.
Welding Gloves Leather gauntlet designs. MIG, TIG, MMA welding and fabrication tasks.
High-Dexterity Gloves Synthetic leather, coated liners and stretch fabrics. Assembly, automotive, warehousing and general handling.

5. Applications

Industry Applications

Glove requirements vary by sector and task. Construction, oil and gas, welding, food production, healthcare, laboratories, cold stores and power tool work can all require different glove materials and protection levels.

Industry / Sector Specific Hazard / Task Recommended Glove Type
Construction Handling rebar, tools, sheet materials and sharp edges. Cut-resistant EN 388 gloves.
Construction Adhesives, sealants and wet cement-type exposure. Nitrile or chemical-resistant gloves matched to the substance.
Oil and Gas Chemical and hydrocarbon exposure. Nitrile or neoprene chemical-resistant gloves.
Welding and Fabrication Welding spatter, heat and sharp edges. Leather welding gauntlets and suitable heat protection.
Electrical Maintenance Live working and electrical contact risk. EN 60903 insulating rubber gloves with leather protectors where required.
Healthcare Bloodborne pathogen exposure and hygiene tasks. Disposable nitrile gloves.
Food Processing Food contact, cleaning and light chemical exposure. Food-grade nitrile or task-specific cut-resistant gloves.
Cold Store / Logistics Sub-zero temperatures and handling tasks. EN 511 cold protection gloves.
Power Tool Use Grinders, breakers, jackhammers and vibrating tools. Anti-vibration gloves where suitable, plus other task-specific protection.

Jaybee Supplies Can Help Source Protective Gloves

From cut-resistant and chemical-resistant gloves to disposable nitrile, heat protection, welding gauntlets, cold store gloves, electrical insulating gloves and general handling gloves, we can help you match hand protection to the task.

Shop PPE Equipment

6. Selection

How to Select the Right Glove

PPE is the last line of defence. Hazards should be eliminated or reduced first where possible. Gloves should then be selected to control the remaining risk, based on the task, material, exposure and wearer needs.

Selection principle: identify the hazard first, then check the relevant standard, tested performance level, material compatibility, breakthrough time, dexterity and fit.

Selection Checks

  • Mechanical risk: confirm abrasion, cut, tear and puncture performance under EN 388.
  • Chemical risk: check the glove has been tested against the actual chemical in use.
  • Heat or flame: choose gloves tested for the specific thermal hazard involved.
  • Cold work: check convective cold, contact cold and water permeability ratings.
  • Electrical work: select the correct EN 60903 class and follow inspection and testing requirements.
  • Vibration: remember anti-vibration gloves are not a substitute for exposure reduction.
  • Disposable use: treat disposable gloves as single-use and change them between tasks.
  • Latex risk: use nitrile or vinyl where latex sensitivity is possible or unknown.

Wearer and Task Considerations

  • Dexterity: choose the thinnest glove that still meets the required protection level.
  • Fit: gloves that are too large bunch up; gloves that are too tight restrict circulation.
  • Wear duration: long periods in impermeable gloves can affect skin condition.
  • Other PPE: make sure gloves overlap sleeves and work with cuffs, harnesses, tools and protective clothing.
  • Grip: confirm the glove does not reduce tool control, especially with powered equipment.

7. Fit & Maintenance

Fit, Use and Maintenance

Gloves only protect properly when they fit correctly, are worn for the full task, are removed safely and are stored or disposed of as intended. Poor fit, contamination, re-use of single-use gloves or incorrect removal can all create avoidable risk.

Correct Fit

  1. Choose gloves that fit snugly without restricting circulation.
  2. Check there is no bunching at the fingertips.
  3. Use manufacturer sizing guides because S, M, L and XL vary between brands.
  4. Use gauntlet cuffs where wrist and forearm protection is needed.
  5. Carry out a fit check on first issue to confirm comfort and dexterity.

Correct Use

  1. Wear gloves for the full duration of the hazardous task.
  2. Do not touch clean surfaces or your face while wearing contaminated gloves.
  3. Remove chemical gloves by peeling from the wrist inside-out.
  4. Use double-gloving where high-risk chemical or biological tasks require it.
  5. Do not share gloves between workers.

Cleaning and Storage

  1. Follow manufacturer guidance for reusable chemical gloves.
  2. Do not machine wash leather or heat-resistant gloves unless the manufacturer confirms it is suitable.
  3. Store electrical insulating gloves flat, away from sharp objects, heat, oil and UV light.
  4. Store gloves away from direct sunlight, ozone sources and extreme temperatures.
  5. Dispose of single-use gloves after one task. Do not wash and re-use them.

8. Inspection

Inspection and Replacement

Protective gloves should be inspected before use and replaced when damaged, degraded, contaminated or beyond their service life. Electrical and chemical gloves may also have specific shelf-life and testing requirements.

Inspection Point What to Check Action
Visible Damage Tears, cuts, punctures, holes or worn areas. Remove from service and replace.
Material Condition Discolouration, stiffening, cracking or chemical degradation. Replace if protection may be compromised.
Electrical Gloves Air leaks, pinholes, expiry dates and test status. Withdraw if damaged, out of date or untested.
Seams Open stitching, failed bonding or seam weakness. Replace before use.
Contamination Chemical, biological, oil or unknown contamination from previous use. Clean only if approved or dispose of safely.
Heat Protection Gloves Singed areas, thinning, stiffness or heavy contamination. Replace if thermal protection is uncertain.

Typical Replacement Triggers

  • Disposable gloves: single use only and discarded after each task.
  • Chemical gloves: replace if permeation breakthrough is suspected or service life is exceeded.
  • Electrical insulating gloves: follow testing and inspection requirements before use.
  • Cut-resistant gloves: replace when fibres are damaged, thinned or worn at the fingertips and palm.
  • Leather or welding gloves: replace when leather becomes brittle, thin, holed or heavily contaminated.

9. Common Mistakes

Common Protective Glove Mistakes

  • Using the wrong glove for the hazard: a mechanics glove used for chemical handling offers no reliable chemical resistance.
  • Wearing gloves near rotating machinery: gloves can become entangled in lathes, drills and milling machines where the risk assessment says they should not be worn.
  • Removing chemical gloves incorrectly: pulling from the fingertips can contaminate the skin.
  • Ignoring shelf life: chemical and electrical gloves can degrade over time, even if unused.
  • Assuming cut-resistant means cut-proof: cut-resistant gloves reduce risk but do not eliminate it.
  • Sharing gloves between workers: this can transfer chemical residues, bacteria and skin conditions.
  • Continuing to use damaged gloves: torn, stiff, discoloured or degraded gloves should be removed from service.
  • Selecting gloves without a risk assessment: choosing by familiarity or price alone is not a suitable safety process.

Need Protective Gloves for Your Team?

Jaybee Supplies can help you choose cut-resistant gloves, chemical-resistant gloves, disposable nitrile gloves, welding gauntlets, cold protection gloves, electrical insulating gloves, anti-vibration gloves and wider PPE for your workplace.

Call 01282 505043

sales@jaybeesupplies.co.uk

Smart Online Portal