Experts in Manufacturing & Engineering Workwear & PPE Solutions

Book a Consultation with the Uniform Experts

Call us today on 01282 505043 or email sales@jaybeesupplies.co.uk to arrange your free, no-obligation consultation.

Advantage PPE and Workwear — helping manufacturing and engineering businesses equip their workforce with practical PPE for machining, fabrication, assembly, welding, maintenance, electronics and factory-floor environments.

⚠️General guidance only: the PPE listed on this page is a general guide for this sector. Actual requirements depend on the specific role, task and site conditions, and must be confirmed against a proper risk assessment for each role. For the full legal requirements, see the HSE PPE Regulations 2022.

PPE is the last line of defence to an identified risk.
It’s the employer’s responsibility to provide PPE in line with Role Risk Assessments.

Industry Guide 02

Manufacturing & Engineering PPE

From CNC machining and metal fabrication to assembly lines and warehouses on the factory floor, manufacturing environments bring together moving machinery, noise, flying debris, chemicals and repetitive manual tasks. Below is a practical, head-to-toe guide to the PPE typically required in these settings.

Need a hand? If you’d like a tailored PPE list for your specific production line or risk assessment, just give us a call.

Call 01282 505043

Requirements vary by role and site — always confirm against your own risk assessment. As a general guide:



Required on most sites



Situational / task-specific



Recommended good practice

Manufacturing and engineering head protection PPE

Head Protection

  • Safety helmets for overhead crane/racking areas (EN 397) — Situational
  • Bump caps for low-clearance machinery areas — Situational
  • Hair nets/snoods near rotating machinery — Situational

Manufacturing and engineering eye and face protection PPE

Eye & Face Protection

  • Safety glasses (EN 166) — Required
  • Goggles for swarf/coolant splash — Situational
  • Face shields for grinding/machining — Situational
  • Welding helmets/visors (fabrication) — Situational

Manufacturing and engineering hearing protection PPE

Hearing Protection

  • Ear plugs (disposable/reusable) — Required
  • Ear defenders on high-noise production lines — Required
  • Communication headsets for noisy control rooms — Recommended

Manufacturing and engineering respiratory protection PPE

Respiratory Protection

  • Disposable dust masks (FFP2/FFP3) — Situational
  • Half-mask respirators with filters (fumes/solvents) — Situational
  • Welding fume extraction masks — Situational
  • RPE face-fit testing kits — Recommended

Manufacturing and engineering hand protection PPE

Hand Protection

  • Cut-resistant gloves for sheet metal/sharp parts (EN 388) — Required
  • Heat-resistant gloves (welding/hot processes) — Situational
  • Chemical-resistant gloves (solvents, oils, coolants) — Situational
  • Anti-vibration gloves (power tools) — Recommended

Manufacturing and engineering foot protection PPE

Foot Protection

  • Safety boots/shoes, steel/composite toe (EN ISO 20345) — Required
  • Midsole puncture protection — Required
  • Anti-static/ESD footwear (electronics assembly) — Situational
  • Metatarsal guards (heavy parts handling) — Situational

Manufacturing and engineering body protection PPE

Body Protection

  • Boiler suits/coveralls — Required
  • Flame-retardant clothing (welding/hot works) — Situational
  • Chemical-resistant aprons (coolants/solvents) — Situational
  • Hi-vis vests in shared vehicle/pedestrian areas — Required

Manufacturing and engineering specialist protection PPE

Specialist Protection

  • Anti-static/ESD wristbands (electronics/component work) — Situational
  • Machine-guarding aware clothing (no loose sleeves/ties) — Required
  • Lockout-tagout kits for maintenance staff — Recommended
  • Barrier creams for repeated oil/solvent contact — Recommended

A note on fit: a machine operator standing next to rotating parts has very different PPE needs to a maintenance engineer carrying out lockout-tagout, even on the same shop floor — PPE choice should always follow the task and machinery involved, not just the industry label. This is exactly why a role-specific risk assessment matters more than a generic list.

Looking for another sector? More industry guides are being added regularly. In the meantime, talk to us and we’ll build a role-based PPE list for your specific site.

PPE is the last line of defence to an identified risk.
It’s the employer’s responsibility to provide PPE in line with Role Risk Assessments.

Book a Consultation with the Uniform Experts

If you’re looking to upgrade your manufacturing or engineering workwear and PPE, we’d love to help. Our experts can work with your machinery, production processes, chemical exposure, noise levels and individual roles to create a tailored solution for machine operators, engineers, fabricators, welders, maintenance teams and assembly personnel.

Talk to Our Team

Call us today on 01282 505043 or email sales@jaybeesupplies.co.uk to arrange your free, no-obligation consultation.

Advantage PPE and Workwear — helping manufacturing and engineering businesses equip their workforce with practical PPE for machining, fabrication, assembly, welding, maintenance, electronics and factory-floor environments.