PPE Knowledge Centre

Master Index

Complete reference guide to all 12 PPE Knowledge Centres — covering every major category of personal protective equipment used in UK workplaces. Use this index to navigate the series, cross-reference related categories, and direct workers, safety managers, and procurement teams to the right document.

SERIES
PPE Knowledge Centre — 12 Categories

VERSION
1.0

OWNER
[Complete before publishing]

DATE
May 2026

⚠ This index and all linked knowledge centres are knowledge guides only and do not constitute legal advice. Regulations and standards change. Always check HSE.gov.uk directly for current requirements. The reader is responsible for compliance.

This series provides structured reference guidance for workers, safety managers, and procurement teams on all major categories of PPE used in UK workplaces. Each knowledge centre follows a consistent 10-section format covering hazards, legislation, types and classifications, industry applications, selection, fit and use, inspection, common mistakes, and further resources.

⚠ Note: PPE is always the last line of defence. Before specifying any PPE, the hierarchy of control must be applied: eliminate the hazard, substitute, use engineering controls, use administrative controls — and only then specify PPE as a final measure.

Product Knowledge Hub

🔗

Cross-Reference Notes

01

EN 388 (mechanical), EN ISO 374 (chemical), EN 407 (heat), EN 511 (cold), EN 60903 (electrical), EN ISO 10819 (vibration), EN ISO 12477 (welding). 10 glove types, 13-industry application table.

EN 388
EN ISO 374
EN 407
EN 511
EN 60903

02

EN 397 (industrial), EN 14052 (high performance), EN 812 (bump cap), EN 50365 (electrical), EN 12492 (climbing). Service life by component, inspection checklist, 9 helmet types.

EN 397
EN 14052
EN 812
EN 50365

03

EN ISO 20345 complete suffix code decoder (SB through S5, HRO, CI, HI, ESD, WR, CR, AN, SRC). 12 boot types, 16-industry table. See also: KC12 Safety Shoes for lower-cut footwear.

EN ISO 20345
EN ISO 20346
EN ISO 20347

04

EN 166 lens marking decoder, welding shade number guide (14 rows). 12 product types including laser eyewear (EN 207). Auto-darkening helmets (EN 379), UV filters (EN 170), IR filters (EN 171).

EN 166
EN 175
EN 169
EN 207
EN 379

05

EN 352-1 through EN 352-7. Noise action levels (80/85/87 dB), SNR selection method and calculation, double protection guidance. 10 hearing protection types, audiometry requirements.

EN 352-1
to EN 352-7
Noise Regs 2005

06

EN 361 (harness), EN 355 (energy absorber), EN 360 (SRL), EN 795 (anchor), EN 358 (positioning). Fall clearance calculation table, suspension trauma guidance, rescue planning requirements.

EN 361
EN 355
EN 360
EN 795

07

EN ISO 20471 Class 1/2/3. Fluorescent and retroreflective area requirements, minimum class by industry and environment, colour options (yellow vs orange), washing guidance.

EN ISO 20471
Class 1/2/3

08

EN 149 (FFP1/2/3), EN 143 (particle filters P1/2/3), EN 14387 (gas filters A/B/E/K), EN 12941 (PAPR TH2/TH3), EN 137 (SCBA). APF table, fit testing, COSHH/WEL calculation method.

EN 149
EN 14387
EN 12941
EN 137

09

EN ISO 11612 (flash fire), EN IEC 61482-2 (arc flash/ATPV), EN ISO 11611 (welding), EN 1149-5 (anti-static/DSEAR), EN ISO 14116 (limited flame spread). Arc flash incident energy analysis guidance.

EN ISO 11612
EN IEC 61482-2
EN 1149-5

10

Full welding ensemble: helmet (EN 175/379), clothing (EN ISO 11611), gloves (EN ISO 12477), boots (EN ISO 20345 HRO), RPE (FFP3/TH3 — welding fume is a Group 1 carcinogen), ear protection, neck protection.

EN 175
EN ISO 11611
EN ISO 12477

11

EN 342/EN 14058 (cold), EN ISO 13997/EN 388 (cut-resistant). Colour-coding system, detectable clothing, HACCP cross-reference, allergen zone PPE. Dual worker + food hygiene coverage.

EN 342
EN 14058
EN ISO 13997
EN 388

12

EN 342/EN 14058 (cold), EN ISO 13997/EN 388 (cut-resistant). Colour-coding system, detectable clothing, HACCP cross-reference, allergen zone PPE. Dual worker + food hygiene coverage.

EN 342
EN 14058
EN ISO 13997
EN 388

📌 Safety Footwear cross-reference: Knowledge Centre 12 (Safety Shoes) covers lighter-duty low-cut footwear. For full-height safety boots, the complete EN ISO 20345 suffix code decoder (HRO, CI, HI, AN, WR, CR, ESD), and higher-risk applications including construction, outdoor work, foundry, and heavy industry — see Knowledge Centre 03 (Safety Footwear — Boots).

How to Use This Series

For Workers

  • Locate your PPE category in the index above and open that knowledge centre.
  • Read Sections 1 (hazards), 5 (selection), 6 (fit and use), and 7 (inspection) as a minimum.
  • Use the pre-use inspection checklist in Section 7 before every shift.
  • Report damaged, worn, or incorrect PPE to your supervisor immediately.

For Safety Managers

  • Use alongside current risk assessments. Knowledge centres provide context and standard references, not a substitute for site-specific assessment.
  • Sections 2 (legislation), 3 (types), and 4 (industry applications) support PPE specification decisions.
  • Common Mistakes tables in Section 8 are suitable for toolbox talks and induction training content.
  • Verify all legislative links annually and update the document review log when complete.

Cross-Reference Notes

Safety Footwear — KC03 (Boots) and KC12 (Safety Shoes)

  • KC03 Safety Footwear (Boots) — full-height and ankle-height boots; complete EN ISO 20345 suffix decoder; construction, outdoor and heavy-industry applications.
  • KC12 Safety Shoes — low-cut shoes, safety trainers, clogs and ESD footwear; warehousing, retail, healthcare, food service and electronics.
  • Both share the EN ISO 20345/20346/20347 standard family. Select the document for the specific footwear format and risk level.

Welding PPE (KC10), Eye & Face (KC04) and FR Clothing (KC09)

  • KC10 Welding PPE is the primary reference for the complete welding ensemble.
  • Cross-reference KC04 for the detailed welding shade number guide and EN 166 lens marking decoder.
  • Cross-reference KC09 for EN ISO 11611 welding clothing detail and arc-flash standards under EN IEC 61482-2.

RPE (KC08) and Welding PPE (KC10)

  • KC08 RPE provides the full RPE framework, including COSHH, APF, fit testing and all filter types.
  • KC10 Welding PPE summarises welding-specific RPE requirements, including the 2019 Group 1 carcinogen reclassification.

Document Control

Series Title PPE Knowledge Centre
Total Documents 12 category knowledge centres + this Master Index
Format Word (.docx) and HTML (.html) for each document
Version 1.0 — May 2026
Review Frequency Minimum annually, or when relevant legislation or standards change
Owner [Safety Manager / Responsible Person — complete before publishing]
Next Review Due [Date — complete before publishing]

Discuss your compliance with us

If you are unsure whether your current PPE, workwear or purchasing process is aligned with your legal duties, speak to our team. We can help you understand the next sensible step, whether that is a free compliance health check or a general enquiry about a specific requirement.